Sonoscan C-SAM Series D9000
Tool status: Shut down and moved to the warehouse. It is wrapped but not crated.
Original PO Configuration. Audit to verify.
VISUAL ACOUSTICS C-SAM DIGITAL ACOUSTIC MICRO IMAGING SYSTEM
1 D9000 Digital Very High Resolution C-Mode
Scanning Acoustic Microscope consisting
of the following:
INTEGRATED VIBRATION FREE
1 CONSOLE“NEW” Desk Style; 72” width x 30” depth x 60”
height (1.8m x .76m x 1.5m) or Ergonomic
1 TOWER Isolated rigid scan tower and mechanism for
stable, shock free operation.
1 SDX770 Very High Speed Large Area Access Scanner
with 12” x 12” scan access area (24″/sec
constant velocity & + 0.5 micron).
1 SDX300 Large Sample Tank Stage for SDX750, SDX760 &
SDX770 Scanners.(20” x 20”)
1 SDX3000 Digital High Performance 500 MHz Bandwidth
Pulser/Receiver for use with Ultrasonic
Transducers up to 300 MHz. All transducer
Parameters are digitally selected by the pulser.
The receiver has 95db of gain for maximum
absorbing samples. The gain
is digitally selectable in precision 0.5db steps
for quantitative materials characterization.
1 DAC248 DUAL CHANNEL A-scan Waveform Display
and Capture Card for Digital Oscilloscope
Data & Archiving.
1 DAC265A Up to 2048 x 1920 Very High Resolution
Enhanced Scanning and Data Acquisition
1 SDX117 Dual 17” Monitors for Simultaneous Viewing of
Full Resolution Acoustic Image and Graphical
1 AIPD Acoustic Impedance Polarity Detector
1 GREY 256 Linear Grey Scale levels with (+) and (-)
1 Intel Pentium III 800 MHz Processor with 20 GB
HD, 512 MB (100 MHz) RAM, LS120 (3.5”/1.44 MB FD
& 120MB SuperDisk), CD Writer (CD-R & CD-RW),
10/100 LAN Card & 56K Modem.
Note: Because computer hardware changes
so often in the marketplace, this is the minimum
configuration that will be supplied.
SOFTWARE AND OPERATION MODES
1 DAC262 Calibration Test Software & Standard Sample.
1 DAC244W Visual Acoustics operating software for C-SAM
will be provided with Windows XP.
1 DAC293 Applications Setup Wizard – Assists Users in
Instrument Parameters and Selecting Optimum
Determines Required Transducer Position, Gate
Setting and Resolution for Desired
Inspection Depth Based on Sample
Construction and Material.
1 DAC270 Zip SliceTM/3VTM Package – Automated,
mographic Image Acquisition
With Acoustic Soli
dTM Digital Reconstruction for
Virtual Volumetric Viewing (3V) with 3-D
profiling & Non-destructive Cross Sectioning.
1 AUTOSCAN Automatically goes to pre-programmed
location(s), selects field of view,
auto focuses, auto selects of gate
parameters and gains for virtually automatic
inspection of the samples.
1 DAC247 Survey Mode for Quick Set-up and Minimum Scan
Times (<10 sec.) in Pre-Screening and Parts
1 DAC228 Advanced User Software for Single and
Multiple Quantitative B-Scan Analysis Mode
(Q-BAM) for Virtual Cross Sections.
1 DAC220 SONOLINK Package of Technical Support Services.
1 DACPCX Paperless TIFF, PCX & BMP file Outputs for
Electronic Image Transfer.
1 RECALL Automatic Storage and Recall of instrument setup
parameters with every image saved in “.IMW”
1 CURSOR Cursor mode to reference an A-scan with each
pixel position in the image in real-time and
lectable A-scans to be stored with
1 MICRO- Precision gating of echoes with 0.25 nsec step
SLICE for narrow layer-by-layer sample depth analysis.